Digirig – integrated digital modes interface for amateur radio

Beschreibung

Digirig Mobile is a digital modes interface for amateur radio.
This listing is for revision 1.9 using TRRS connectors. Backward
compatible to rev 1.6

* combines audio codec, serial CAT interface and PTT switch
* supports full featured CAT interface: PTT, bands, tuning etc. (not
just VOX based PTT)
* uses a single USB connection to computer minimizing the cables mess
* serial computer aided transceiver (CAT) port can be configured for
logic levels, RS-232, CI-V or TX-500*
* permanently available independently from CAT port an open-collector
PTT switch controlled by RTS signal of the COM port to interface HTs
and mobile radios
* axillary connection points to CM108 codec – for simple Allstar
homebrew node builds
* uses widely supported CP2102 serial interface and CM108 audio
codec (generic audio device – no driver necessary)
* small rugged aluminum enclosure ideal for mobile operations
* interfaces the transceiver using widely available 3.5mm jacks
(TRRS) for simple homebrew cable builds
* growing collection of pre-made cables including popular Icom,
Yaesu, Elecraft, Baofeng, Xiegu transceivers
* isolation can be easily added using inexpensive USB
isolator dongle*

Notes regarding the interface configuration:

* PTT option is always available independently from CAT and it works
with any radio
* CAT configuration is done with solder jumpers and can not be
changed operationally
* Digirig’s default configuration for serial CAT is 3.3V logic
levels. If the interface is ordered together with the transceiver
cables and there is no ambiguity the configuration will be changed to
match the cables. Please use order notes field or follow up with the
email if you have a specific preference.
* Learn more about CAT configurations*

This listing does not include cables. The USB cable is a standard USB
Type-C cord which must support both power/charging and data.

* Please refer to digirig website for detailed information.

Artikelmerkmale